Technical Bulletin PAGE: 45/75
Reissued:21-Apr-14
Simplified Paper Feed Interval Setting
Apply the simplified paper feed interval setting by referring to the table below. The values
are described for each paper size and color, which allows the shock-jitters to occur not on
the sheets but in between the sheets. This however will require customer acceptance as
the productivity will be reduced. Reduced productivity as a result of this modification is
also described in the bottom table.
A4 A3 SRA3 11 x 8.5 8.5 x 14 11 x 17 12 x 18 13 x 19
Bk
0.0 0.2 0.1 0.0 0.4 0.2 0.1 0.1
C
0.0 0.7 0.6 0.0 0.0 0.7 0.6 0.6
M
0.2 0.1 0.0 0.2 0.3 0.1 0.0 0.0
Y
0.1 0.4 0.3 0.1 0.0 0.4 0.2 0.2
<< as reference >>
Bk
100 85 92 100 70 85 92 92
C
100 67 67 100 100 67 67 67
M
76 91 100 76 76 91 100 100
Y
86 74 81 86 90 74 86 86
*1 : Image Transfer Roller
2) Advanced Settings;
#37 Paper Feed Interval to set
ITR
*1
Shock Jitter off position