Technical Bulletin PAGE: 57/75
Reissued:21-Apr-14
- Procedure 2 –
2-1. Execute the standard developer removal operation.
2-2. Pull out the development unit and hit the die-casted rear plate of the development unit
with the grip of a screwdriver. (Hit several locations from the front to rear about 3 times
respectively to drop the old developer stuck inside the unit.)
(Photo 2-A) (Photo 2-B)
Similarly, hit the 2 screws fixing the Agitation auger and the Development auger about
5 times respectively (to drop the old developer adhered to the augers).
(Photo 2-C) (Photo 2-D)
Re-execute the developer removal operation. (Specify a different color to validate the
operation.)
To Next Page
Loading...
