Ricoh pro c901 - Page 510

Technical Bulletin PAGE: 58/75
Reissued:21-Apr-14
Model: Aries-P1.5/C1.5
Date: 10-Mar-14
No.: RM077107b
2-3. Spread a large sheet of paper (for example packing paper) on a table to prepare
removal of old developer.
2-4. Pull out the development unit and hold it so that the toner supply port faces down as
shown in the photo below. Hold both ends of the unit.
Hold only the
areas indicated in
blue throughout
the entire
procedure.
DO NOT hold the
areas indicated in red
as doing so could
affect the PG and
image quality and
cause toner clumps to
form on the sleeves.
IMPORTANT