Technical Bulletin PAGE: 4/4
Model: Aries-P1.5/C1.5, AG-P1/C1, AGL-P1/C1
Example
Following is an example of adjusting a misalignment of 25 micrometers in both Main and
Sub Scan directions in Cyan.
Dot/sub dot to micrometer conversion rate:
1 Dot = 21.16 micrometers
1 Sub dot = 1.3 micrometers
1. Main Scan direction
SP2-191-004 ‘Line Position Adj. Offset C Main Regist’ (dot)
+ 1 dot (= 21.16 micrometers)
SP2-191-007 ‘Line Position Adj. Offset C Main Regist’ (sub dot)
+ 3 sub dots (= 3.9 micrometers)
2. Sub Scan direction
SP2-101-017 ‘Color Interval Registration Adjustment Sub Scan:Bk-C:Drum Motor Adj’
+ 25 micrometers
APPENDIX
Double-click to open the embedded Excel file below. Adjustment value is calculated
automatically by inputting the value of misalignment measured with the magnifier.
Length of
misalignment.xls
RM077109 - length of misalignment.xls
To Next Page
Loading...
