Technical Bulletin PAGE: 38/44
Model: Aries-P1.5/C1.5 Date: 17-Feb-11 No.: RM077018
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Motor overload
Loose connection of the stapler home position sensor
Loose connection of the stapler movement motor
Defective stapler home position sensor
Defective stapler movement motor
203. Check or clear obstacles around the motor drive
mechanism.
204. Check the harness connection.
205. Replace the stapler home position sensor.
206. Replace the stapler movement motor.
207. Replace the finisher main board.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Booklet Stapler Motor Error 1: Front Motor (Booklet Finisher
D434)
The booklet stapler - front does not start operation within the
specified time.
The 1st detection failure issues a jam error, and the 2nd failure
issues this SC code.
Booklet stapler motor (front) harness loose, broken, defective
Booklet stapler motor (front) overloaded due to obstruction
Booklet stapler motor (front) defective
Booklet finisher control board defective
743 B
208. Check or clear obstacles around the motor drive
mechanism.
209. Check the harness connection.
210. Replace the booklet stapler motor - front.
211. Replace the finisher main board.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Booklet Stapler Motor Error 2: Rear Motor (Booklet Finisher
D434)
The booklet stapler - rear does not start operation within the
specified time.
The 1st detection failure issues a jam error, and the 2nd failure
issues this SC code.
744 B
Booklet stapler motor (rear) harness loose, broken, defective
Booklet stapler motor (rear) overloaded due to obstruction
Booklet stapler motor (rear) defective
Booklet finisher control board defective
To Next Page
Loading...
