Maintenance Mode (for Touch Panel Models)
SM 5-19 M0C3/M0C4/M0C5/M0C6/M0C7
Maintenance
Menu Description
DFU (Designed for Factory
Use)
machine is reached.
[On or Off (Default)]
SC559 Detection [On or Off (Default)]
Clear Engine Memory Resets the engine settings stored in the EEPROM to factory
default.
Total Counter Info Displays the total counter (Engine).
EM Counter
Info
Transfer
Roller - Time
Displays the EM counter (Transfer Roller: Time).
Paper Feed
Roller –
Pages
Displays the EM counter (Paper Feed Roller: pages).
Fusing Unit -
Time
Displays the EM counter (Fusing Unit: time).
Transfer
Roller -
Pages
Displays the EM counter (Transfer Roller: pages).
Fusing Unit -
Pages
Displays the EM counter (Fusing Unit: pages).
Transfer
Roller
Remain
Displays the remainder until the service life (Transfer roller: %)
Paper Feed
Roller
Remain
Displays the remainder until the service life (Paper feed
roller: %)
Fusing Unit
Remain
Displays the remainder until the service life (Fusing unit: %)
Prt Cartridge
Info
Kind ID Displays the toner cartridge (AIO) information (Kind ID).
Toner End
History
Displays the toner cartridge (AIO) information (Toner End
History).
Refill Flag
Status
Displays the toner cartridge (AIO) information (Refill flag status).
Unit Print
Counter
Displays the toner cartridge (AIO) information (Unit Print
Counter).
Motor Rotation Time Displays the main motor rotation time.
Reset Paper Feed Rol Life Clears the EM counter of the paper feed roller.
Waste Toner Disposal
Sets the machine operation at "waste toner full" of the refilled
AIO.
ev. 10/17/2018