Settings for @Remote Service (for Printer Models)
SM 2-9 M0C3/M0C4/M0C5/M0C6/M0C7
Error Codes
When other errors occur, check the following error code list.
SP menu > [@Remote] > [Remote Service] > [Instl: ErrorCode]
Caused by Operation Error, Incorrect Setting
Code Meaning Solution/ Workaround
-12003 Attempted registration without execution of a
confirmation and no previous registration.
Perform Confirmation before
attempting the Registration.
-12004 Attempted setting with illegal entries for
certification and ID2.
Check the ID2 of the machine.
-12006 A confirmation request was made after the
confirmation had been already completed.
Execute registration.
-12008 Update certification failed because mainframe
was in use.
Check the machine condition. If the
machine is in use, try again later.
Error Caused by Response from GW URL
Code Meaning Solution/ Workaround
-2387 Not supported at the Service Center
-2389 Database out of service
-2390 Program out of service
-2391 Two registrations for the same mainframe Check the registration condition of the
machine
-2392 Parameter error
-2393 External RCG not managed
-2394 Mainframe not managed
-2395 Box ID for external RCG is illegal.
-2396 Mainframe ID for external RCG is illegal.
-2397 Incorrect ID2 format Check the ID2 of the machine.
-2398 Incorrect request number format Check the Request No.