IP-Fax Transmission and Reception
Component Specifications
Network Standard:
• Ethernet interface (100BASE-TX/10BASE-T)
Optional:
• Gigabit Ethernet interface (1000BASE-T/100BASE-TX/
10BASE-T)
• IEEE 802.11a/b/g wireless LAN interface
Scan line density 8 × 3.85 lines/mm, 200 × 100 dpi (Standard character),
8 × 7.7 lines/mm, 200 × 200 dpi (Detail character),
8 × 15.4 lines/mm (Fine character: optional),
16 × 15.4 lines/mm, 400 × 400 dpi (Super Fine character:
optional)
Maximum original size Standard: A4 , 8
1
/
2
× 14
Custom: 210 × 1,200 mm, 8
1
/
2
× 47 inches
Maximum scanning size 210 × 1,200 mm, 8
1
/
2
× 47 inches
Transmission protocol Recommendation: T.38, TCP, UDP/IP communication, SIP (RFC
3261 compliant), H.323 v2
Compatible machines IP-Fax compatible machines
IP-Fax transmission function Specify an IP address and send faxes to an IP-Fax compatible
fax through a network.
Also capable of sending faxes to a G3 fax connected to a
telephone line via a VoIP gateway.
IP-Fax reception function Receive faxes sent from an IP-Fax compatible fax through a
network.
Also capable of receiving faxes from a G3 fax connected to a
telephone line via a VoIP gateway.
8. Appendix
422
To Next Page
Loading...
