• Select [Encrypt All] in the encryption settings and encrypted e-mail is sent regardless of the
encryption settings in [Security]. For details about encryption, consult your administrator.
• The electronic signature is limited in the following ways, depending on the S/MIME settings on
Web Image Monitor. For details about the electronic signature, consult your administrator.
• If [Set Individually] is set:
You can set [Signature] in [Security] and attach an electronic signature to e-mail for every
transmission.
• If [Do not Use Signatures] is set:
Even if you press [Security], [Signature] does not appear.
• If [Use Signatures] is set:
An electronic signature is attached when you send e-mail. The [Signature] setting in [Security]
cannot be cancelled.
• p.375 "Parameter Settings"
Quitting the Forwarding Function
1. Press [Facsimile Features].
2. Press [Reception Settings].
3. Press [Forwarding].
4. Press [Off], and then press [OK].
5. Press the [User Tools/Counter] key.
Forwarding Mark
This section describes Forwarding Mark.
7. Facsimile Features
358
To Next Page
Loading...
