Stored Reception File User Setting
The administrator can be specified for managing documents stored on the machine after fax documents
are received. To specify the administrator, enter the administrator user code for managing documents
using Web Image Monitor. You can also restrict control panel operations such as printing or deleting
received documents.
• You must register the administrator's User Code to the destination list in advance.
• It is recommended that you use Web Image Monitor operating under the same network
environment as this machine. Otherwise, the Web browser may not open and an error may occur.
1. Press [Facsimile Features].
2. Press [Reception Settings].
3. Press [Stored Reception File User Setting].
4. If you want to use a user code, press [On].
If you do not use a user code, press [Off] and proceed to step 6.
To cancel your selection, press [Cancel]. The display returns to that of step 3.
5. Press the Destination key of the user you wish to specify, and then press [OK].
Stored Reception File User Setting
363
To Next Page
Loading...
Need help?
General
