• Immediate Transmission
• Closed Network Transmission
• SUB Code Transmission
• On Hook Dial
• Manual Dial
• JBIG Transmission
• ECM (Error Correction Mode)
• Memory File Transfer
Functions Not Available by Internet Fax Reception
This section tells you which functions are not available for Internet Fax reception.
The following functions are available for standard fax reception, but not for Internet Faxing:
• Memory Lock Reception
• SEP Code Reception
• Authorized Reception per Sender
• Reception File Print Quantity per Sender
T.37 Full Mode
This machine is T.37 full mode compatible. T.37 full mode is an international standard for Internet Fax
transmission. (ITU-T Recommendation, RFC2532)
When an Internet Fax communication is made between T.37 full mode compatible machines, the
receiver side sends the return receipt (dispatched) in response to the reception notice request attached to
the sent e-mail. This return receipt includes the receiver's reception capability information (compression
type, paper size, and resolution). When the receiver is programmed in the Address Book as the full
mode destination, the sender side automatically registers the received information in the Address Book.
This allows you to send a subsequent Internet Fax document to that receiver based on this information.
Returning a Return Receipt
When e-mail is received, if the sender requests reception notice, the receiver sends a return receipt
that includes the receiving machine's capability (compression type, paper size, and resolution).
Registering the Received Reception Confirmation Contents
When the sender receives the return receipt that includes the receiver's reception capability, the
sender checks that the final recipient address sent is programmed in the Address Book. If it is
programmed as a full mode destination, the sender automatically registers the receiver's reception
capability. The registered reception capability is updated each time the sender receives new
1. Transmission
46
To Next Page
Loading...
