• For details about each transmission type, see “IP-Fax Functions”, “Internet Fax Transmission”, “E-
mail Transmission”, and “Folder Transmission”.
• p.38 "IP-Fax Functions"
• p.43 "Internet Fax Transmission"
• p.49 "E-mail Transmission"
• p.53 "Folder Transmission"
Memory Transmission
Memory Transmission mode has standard fax, Internet Fax, IP-Fax, e-mail transmission, and folder
transmission.
• If there is a power failure (the main power switch is turned off) or the machine is unplugged for
about one hour, all the documents stored in memory are deleted. As soon as the main power
switch is turned on, the Power Failure Report is printed to help you check the list of deleted files.
Simply turning off the power by pressing the operation switch does not delete stored documents.
See “Turning Off the Main Power / In the Event of Power Failure”, Troubleshooting.
• If memory is full (0% appears in “Memory” at the upper right of the screen), Memory Transmission
is disabled. Use Immediate Transmission instead.
1. Make sure [Immed. TX] is not highlighted.
Normally Memory Transmission mode is selected.
1. Transmission
28
To Next Page
Loading...
Need help?
General
