3. Select a file to be printed, and then press [Print].
To cancel printing, press [Cancel].
To delete the document after printing, press [Delete File after Printing].
To perform two-sided printing, press [Print on 2 Sides] before pressing the [Start] key.
4. Press the [Start] key.
To stop printing after pressing the [Start] key, press [Stop Printing]. The display returns to that of step
3.
5. Press [Exit] twice.
The standby display appears.
• This function allows you to print only received and stored documents.
• You cannot print received and stored documents using the Document Server function.
• You can program one of the Quick Operation keys with operations for this function. Using the
Quick Operation Key allows you to omit step 1. For details about Quick Operation Key, see
“General Settings”.
• You can specify and print multiple documents. For the maximum number of documents you can
print at a time, see “Maximum Values”.
• p.335 "General Settings"
• p.427 "Maximum Values"
Deleting Received and Stored Documents
This section explains how to delete documents stored on the hard disk.
Confirming/Printing/Deleting Received and Stored Documents
265
To Next Page
Loading...
