Ricoh SP 5200S User Manual

Requesting a Reception Notice
You can confirm sent documents were properly received using e-mail or the Journal.
The receiver sends back a reception notice message. Once the reception notice message is received,
“OK” appears in the Result column of the Journal, allowing the originator to verify the transmission was
received.
• The Reception Notice feature is only available if the receiver supports MDN (Message Disposition
Notification).
1. Place the original, and then select the scan settings you require.
2. Specify the sender.
For details, see “Sender Settings”.
3. Press [TX Mode].
4. Press [Reception Notice] to highlight it.
5. Press [OK].
The standby display appears.
To check the settings, press [TX Mode].
6. Specify a destination, and then press the [Start] key.
2. Other Transmission Features
168
2

Ricoh SP 5200S Specifications

General

Print Technology	Laser
Print Resolution	1200 x 600 dpi
Duplex Printing	Yes
ADF Capacity	50 sheets
Functions	Print, Copy, Scan, Fax
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Scanner Type	Flatbed, ADF
Connectivity	USB 2.0, Ethernet
Network Connectivity	Ethernet
Print Speed	Up to 47 ppm