Advanced Features
This section describes how to specify a destination using advanced features.
Setting SUB Codes for Transmission
This section explains how to send a document with a SUB Code as a confidential transmission.
A SUB Code is an ID consisting of numbers, , , and spaces. Document transmitted with a SUB Code
is stored in the other party's memory, and not printed automatically. The other party inputs the SUB Code
to print the received document. Privacy can be mutually protected when transmitting a confidential
document intended for a particular receiver, since only a person who knows the SUB Code can print the
document.
Documents can also be sent via facsimiles that have the Transfer Station function.
This function helps you save costs when you send the same document to more than one place in a distant
area, and saves time since many documents can be sent in a single operation.
• Documents can be sent to facsimiles that have the Personal Box function.
• A SUB Code cannot be used with Internet Fax, e-mail transmission, and folder transmission.
• To use this function, set [SUB Code Transmission] to on. For details about [SUB Code Transmission],
see “SUB Code Transmission”.
• Obtain the SUB Code of the other party in advance.
• When sending a confidential document, inform the other party of the SUB Code in advance.
1. Place the original, and then select the scan settings you require.
2. Press [TX Mode].
Advanced Features
143
To Next Page
Loading...
Need help?
General
