Each time you press [mm] or [inch], the units switch between “mm” and “inch”.
If you enter a length and change the units by pressing [mm] or [inch], it is converted automatically
(fractions are rounded off).
14. Press [OK].
15. Press [Exit].
16. Press the [User Tools/Counter] key.
Deleting a Special Sender
This section describes how to delete a Special Sender.
1. Press [Facsimile Features].
2. Press [Reception Settings].
3. Press [Program Special Sender].
4. Press [Delete], and then select the Special Sender you want to delete.
5. Press [Delete].
To cancel deleting a special sender, press [Do not Delete]. The display returns to that of step 4.
6. Press [Exit].
7. Press the [User Tools/Counter] key.
Special Senders to Treat Differently
397
To Next Page
Loading...
