10. Select the size you want to program from the sizes shown.
After selecting the size, proceed to step 14.
11. Make sure that [Vertical] is selected.
12. Enter the vertical size of the paper using the number keys, and then press [ ].
Specify a vertical size from 140 mm (5.6 inches) to 900 mm (35.4 inches).
Each time you press [mm] or [inch], the units switch between “mm” and “inch”.
If you enter a length and change the units by pressing [mm] or [inch], it is converted automatically
(fractions are rounded off).
13. Enter the horizontal size of the paper using the number keys, and then press [ ].
Specify a horizontal size from 64 mm (2.6 inches) to 216 mm (8.5 inches).
7. Facsimile Features
396
To Next Page
Loading...
