Ricoh SP 5200S User Manual

4. Select the program number of the name you want to change.
5. Enter a new program name, and then press [OK].
The standby display appears.
Press [Cancel] to cancel the change.
Deleting a Program
This section explains how to delete an unnecessary program.
1. Make sure that the machine is in facsimile mode and the standby display is shown.
If the standby display is not shown, press the [Facsimile] key.
2. Press the [Program] key.
CCU003
Registering Frequently Used Settings
417
8

Ricoh SP 5200S Specifications

General

Print Technology	Laser
Print Resolution	1200 x 600 dpi
Duplex Printing	Yes
ADF Capacity	50 sheets
Functions	Print, Copy, Scan, Fax
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Scanner Type	Flatbed, ADF
Connectivity	USB 2.0, Ethernet
Network Connectivity	Ethernet
Print Speed	Up to 47 ppm