In Substitute Reception, a received fax document is stored in memory instead of being printed. Fax
documents received using Substitute Reception are automatically printed when the condition which
caused the machine to use Substitute Reception is rectified.
Depending on why the machine cannot print, Substitute Reception might be used for all fax documents
received, or for only those documents that match a condition specified in the User Parameters in the
Facsimile Features menu.
The Receive File indicator lights to let you know when fax documents have been received using
Substitute Reception.
• Reception may not take place if there is not enough free memory.
• If free memory reaches 0% during Substitute Reception, any further reception becomes impossible
and the current communication is terminated.
• When a fax document is received after [Store] is selected for Reception File Setting in the Facsimile
Features menu, the Receive File indicator lights. For details about Reception File Setting, see
“Reception File Setting”.
• The Receive File indicator may light even when receiving documents using Immediate Reception.
• p.360 "Reception File Setting"
Receiving documents unconditionally
When faxes cannot be printed as normal, Substitute Reception allows fax reception. This section
describes the conditions under which this will occur.
If one of the conditions in the following list occurs, the machine receives all fax documents using
Substitute Reception.
Types of Reception
193
To Next Page
Loading...
Need help?
General
