• The SEP Code is printed on lists and reports.
• p.184 "SEP Code Reception"
• p.414 "Registering and Changing Keystroke Programs"
• p.427 "Maximum Values"
Entering a password
There are times you may want to use a password when receiving faxes by SEP Code Reception.
• For the maximum number of digits for the PWD Code, see “Maximum Values”.
• You can enter numbers, , , and spaces.
• You can store PWD Codes as well as names and fax numbers in the destination list and Keystroke
Programs. For registering into the destination list, see “Registering Addresses and Users for
Facsimile/Scanner Functions”, Network and System Settings Reference. For registering into the
Keystroke Programs, see “Registering and Changing Keystroke Programs”.
• The PWD Code is printed on lists and reports.
• p.414 "Registering and Changing Keystroke Programs"
• p.427 "Maximum Values"
SEP Code RX Reserve Report
This report is printed after SEP Code Reception is set up.
You can use this report to check the reservations for SEP Code Reception.
• You can turn this function on or off with the User Parameter (switch 03, bit 3) in the Facsimile
Features menu.
• If user authentication is set, you can select whether to display a destination with the User Parameter
(switch 04, bit 4) in the Facsimile Features menu.
• If user authentication is set, you can select whether to display a sender name with the User
Parameter (switch 04, bit 5) in the Facsimile Features menu.
• For details about Parameter Setting, see “Parameter Settings”.
• p.375 "Parameter Settings"
Advanced Features
149
To Next Page
Loading...
Need help?
General
