the specified receiver is a group destination that includes an address not registered for the specified
transmission type, the document is routed to an alternative destination. See “Parameter Settings”.
• p.335 "General Settings"
• p.375 "Parameter Settings"
• p.398 "Box Settings"
SUB Code Transfer Report
You can check the results of transmission to Receiving Stations. The machine prints this report when it has
finished transmitting to Receiving Stations.
• You can select whether the SUB Code Transfer Report be automatically printed using the User
Parameter (switch 04, bit 1) in the Facsimile Features menu.
• You can set whether a portion of the original image is printed on the report with the User Parameter
(switch 04, bit 7) in the Facsimile Features menu.
• For details about Parameter Setting, see “Parameter Settings”.
• “Unprogrammed” indicates the document could not be sent because the end receiver is not
programmed.
• “--” indicates that the e-mail or Internet Fax document was sent to the mail server programmed in
this machine.
• For the maximum number of destinations you can register in a group, see “Maximum Values”.
• p.375 "Parameter Settings"
• p.427 "Maximum Values"
Forwarding Received Documents
This machine can forward received documents to other destinations programmed in this machine.
Reception Functions
205
To Next Page
Loading...
Need help?
General
