• p.375 "Parameter Settings"
Journal by e-mail
If the setting is made so that the Journal is transmitted as e-mail, it is transmitted to the e-mail address of
an administrator.
• To transmit the Journal, it is necessary to make settings with the User Parameter (switch 21, bit 4) in
the Facsimile Features menu.
• If user authentication is set, you can select whether to display a sender name with the User
Parameter (switch 04, bit 5) in the Facsimile Features menu.
• For details about Parameter Setting, see “Parameter Settings”.
• To confirm the administrator's e-mail address, use Administrator's E-mail Address under System
Settings. See “File Transfer”, Network and System Settings Reference.
• Depending on security settings, the Destination/Sender name may not appear. You can select
whether to display a destination with the User Parameter (switch 04, bit 4) in the Facsimile Features
menu.
• p.375 "Parameter Settings"
Print Journal
261
To Next Page
Loading...
