6. Check the selected user, and then press [OK].
When a programmed user is deleted from the destination list, message "Destinations are invalid." is
displayed. Enter the user again.
7. Press the [User Tools/Counter] key.
• This function is only available when [Store] is selected in “Reception File Setting”.
• If the programmed user code was deleted using the Address Book Management function under
System Settings, you cannot view received and saved documents using Web Image Monitor or the
machine's control panel. Select [Off] in step 4 or reprogram the user code. See “Administrator
Tools”, Network and System Settings Reference.
• To restrict control panel operations such as printing or deleting received documents, select “On”
for the User Parameters (switch 10, bit 0). See “Parameter Settings”.
• p.375 "Parameter Settings"
7. Facsimile Features
364
To Next Page
Loading...
