Riele Photometer 5010 V5+ - Page 32

4.4 CABLE POWER SUPPLY / PRINTER REF 5010-077
RIELE BERLIN Photometer 5010 V5+ 4.4.2 29.08.2007
Replacement
The Photometer 5010 V5+ has to be dismantled:
• see chapter 5.1 Opening
In case of servicing a device previous to SN 8002 the
connection has to be removed:
Cable PCB motherboard P23 / PCB printer controller
CN2.
Remove the plastic cover of the terminal.
Unscrew the two lens head screws labeled with V1
and GND.