Riele Photometer 5010 V5+ - Delete Free Methods; Memory S2; Multi-Standard Memory

3.3 SERVICE TOOLS
S2 Memory
The submenu shows different kinds of memory.
SERVICE TOOLS SUB MENU
DELETE FREE METHODS
MULTI-STD MEMORY
DEL. LOGGER MEMORY
DEL. QC MEMORY EXIT
S2.1 Delete Free Methods
Attention! With [START] all methods edited by the user
are deleted without a call-back. In the case of doubt
these methods should be checked before: A print out of
all stored methods can be done for an optional later
new programming.
The action ends with a long beep.
[EXIT] leaves the function without any changes.
DELETE FREE METHODS
EXIT START
S2.2 Multi-Standard Memory
Attention! With [DEL] the memory assigned to nonlinear
methods is deleted without a call-back.
The contents of the memory can be exported and
imported by special remote commands (chapter 6.1 –
Communication protocol).
The action ends with a long beep.
[EXIT] leaves the function without any changes.
MULTI-STD MEMORY
EXIT DEL SET
RIELE BERLIN Photometer 5010 V5+ 3.3.4 11.03.2009