4.21 FLOW-THROUGH CUVETTE ADAPTOR REF 1704796001
Function Description
The flow-through cuvette adaptor consists of:
• Plastic adaptor
• Flow-through cuvette with a volume of 32 µl
• Heating unit
• Plug
• Potentiometer for factory calibration
Location
Optical unit
Replacement
Loosen clamp screw, open tube connection, remove adaptor.
Installation
For installation proceed in reverse order.
After installation of a new cuvette adaptor a dark level adjustment has to be done by
[UTILITIES] [DARK LEVEL ADJUSTMENT] [START].
RIELE BERLIN Photometer 5010 V5+ 4.21.1 28.04.2006
To Next Page
Loading...
