RIGOL
User’s Guide for DM3058
Press Name to create an appropriate name for the new sensor.
Figure 2-41 Name edit interface
Explanation:
Switch to Edit area by pressing and choose letter that you want to edit by
using .
Switch to Selection area of letter by pressing and choose required letter by
using .
Press Del to delete current letter under editing
Press to go back to Prpty interface
Press Type to select the type of facile physical quantity has been transformed
by Sensor via corresponding button. And then, press to back to Prpty
interface.
Figure 2-42 Type selection interface
Press Unit button to select the unit for measured physical quantity, for
example: ℃, Pa, %, °, and F. Furthermore, you can define required unit by
USER function.
Figure 2-43 Unit selection interface
To Next Page
Loading...
