RIGOL
User’s Guide for DM3058
Explanations：
Default unit is limited within two characters.
Switch to the character which needs to be edited by using .
Select re required characters by using from A to Z and a to z.
Then, press to go back to New interface and do next step.
(2) Corrsp to input corresponding data. Different kind of Sensor has different
relationship of corresponding data. It is not necessary to input plenty reference
value if the corresponding relationship has more smoothness and good
linearity curve. Then press Add to input reference data.
Press Meas to input the data measured from Random Sensor by Directive keys.
Figure 2-44 Input data
Press Corrsp to input the data measured from Random Sensor by Directive
keys.
Figure 2-45 Input data
Press Done to finish the input for first group of data and go back to View
Interface of Reference value. Please pay attention that indicates the
approximate arithmetic of datum between this data and next one. The
arithmetic of first data sect is default as “Line” which can be modified by
clicking Edit.
Figure 2-46 View interface of Reference data
Arithmetic of
current data
To Next Page
Loading...
