Robopac ROBOTAPE 50 CFA - 3 Technical Information; Machine General Description

ROBOTAPE 50 CFA
3. TECHNICAL INFORMATION
3.1. MACHINE GENERAL DESCRIPTION
‒ The auto-sizing taping machine with manual adjustment is a machine designed and built to close, with
adhesive ta
p
e,
p
roducts
p
acka
g
ed in cardboard boxes in various formats.
‒ Use machine only for the purposes set forth by the manufacturer. improper use of machine can cause
risks to safet
y
and health of
p
ersons, further to economical dama
g
e.
‒ The machine enables sealing small casings with the dimensions indicated in chapt. “Technical
s
p
ecifications”.
‒ It can house two taping units T50 or T75 that use wide adhesive tape rolls 25÷50 mm and 25÷75
mm res
p
ectivel
y
, available on the market.
‒ The packs that contain liquids or insubstantial materials must be suitable for the product and must be
p
erfectl
y
closed and ti
g
ht in order to
p
revent an
y
leaks of the content.
‒ It is equipped with a series of safety devices designed to avoid anyharm befalling the operator or other
persons who come into contactwith the machine in any way. The machine is produced in a range
ofdifferent models in order to suit market re
q
uirements.
‒ This machine is normally installed in workshops or industrial environments protected from the
atmospheric agents.
Use of this machine in explosive environments or when exposed to the elements is strictly
forbidden.
‒ Onl
y
one o
p
erator is re
q
uired to use it to load and unload the boxes and chan
g
e the coil.
English
14/75