ROBOTAPE 50 CFA
6.4. EMERGENCY STOP AND
RESTART
1. Press the machine emergency stop
button when there is imminent danger.
Machine operation stops immediately.
2. After having re-established the normal
operating conditions, the pushbutton
must be released to authorize the
machinery to restart.
3. Restart the machine and check that it
functions correctly (see “Switching the
machine on and off”).
6.5. FORMAT CHANGE
Before starting to operate with different features with respect to previous ones, you must perform some
adjustments on the machine.
The interventions which may be performed are indicated as follows.
‒ Height setting of work table.
‒ Carrier
uide exclusion in entrance.
English
To Next Page
Loading...