Robopac ROBOTAPE 50 CFA - Description of the Operation Cycle

ROBOTAPE 50 CFA
3.2. DESCRIPTION OF THE OPERATION CYCLE
1. Switch the machine on (see “Switching the machine on and off”).
2. Place box (A) at the inlet of machine (B),
between the conveyor belts.
If the machine is equipped with the
"entrance carrier" option, position the
box above it: the box will advance until it
covers the (b) "ta
p
e closure"
p
hotocell.
3. The (b) photocell detects the box, the
carriers (if present) stop, the (C)
conveyor belts automatically adapt to
the width of the box to be taped and
be
g
in to move the box on.
4. The box moves forward and activates the
(c) photocell, the carriers and conveyor
belts are stopped, the bridge comes
down and the conveyor belts are re-
started.
Once it meets photocell (a), the flap
closure (F) comes down to close the (E)
la
y
er.
5.
T
he box continues to move forward to close the other fla
p
s and to be sealed with adhesive ta
p
e.
English
16/75