ROBOTAPE 50 CFA
Summary
1. GENERAL INFORMATION
1.1. PURPOSE OF THE MANUAL
1.2. MANUFACTURER AND MACHINE IDENTIFICATION
1.3. TERMS AND DEFINITIONS
1.4. MODES OF REQUESTING FOR ASSISTANCE
1.5. ATTACHED DOCUMENTATION
1.6. HOW TO READ THE DIRECTIONS FOR USE
2. SAFETY INFORMATION
2.1. GENERAL SAFETY PRECAUTIONS
2.1.1. EMPLOYER OBLIGATIONS
2.2. SAFETY WARNINGS FOR HANDLING AND INSTALLATION
2.3. SAFETY WARNINGS FOR USE AND OPERATION
2.4. APPROPRIATE USE OF THE MACHINE
2.5. SECURITY WARNING FOR REASONABLY FORESEEABLE IMPROPER USE
2.6. SAFETY WARNINGS ON RESIDUAL RISKS
2.7. SAFETY WARNINGS FOR REGULATIONS AND MAINTENANCE
2.8. SAFETY WARNING FOR ELECTRICAL EQUIPMENT
2.9. INFORMATION AND SAFETY SIGNALS
2.10. SURROUNDING AREAS
3. TECHNICAL INFORMATION
3.1. MACHINE GENERAL DESCRIPTION
3.2. DESCRIPTION OF THE OPERATION CYCLE
3.3. SAFETY DEVICE DESCRIPTIONS
3.4. DESCRIPTION OF THE ELECTRICAL DEVICES
3.5. PNEUMATIC DEVICE DESCRIPTION
3.6. ACCESSORIES AVAILABLE UPON REQUEST
3.6.1. DESCRIPTION OF THE TAPING UNIT
3.7. TECHNICAL SPECIFICATIONS
3.7.1. MACHINE DIMENSIONS
3.7.2. TECHNICAL SPECIFICATIONS OF INFEED AND OUTFEED CONVEYORS (OPTIONAL)
3.7.3. SIZES OF CONVEYORS (OPTIONAL)
3.7.4. BOX DIMENSIONS
3.8. NOISE LEVEL
3.9. INSTALLATION ENVIRONMENT CHARACTERISTICS
4. INFORMATION ON HANDLING AND INSTALLATION OPERATIONS
4.1. RECOMMENDATIONS FOR HANDLING AND LOADING
4.2. PACKAGING AND UNPACKING
4.3. TRANSPORT AND HANDLING
4.4. MACHINE INSTALLATION
4.5. CARRIERS INSTALLATION (OPTIONAL)
4.6. RECOMMENDATIONS FOR CONNECTIONS
4.7. PNEUMATIC CONNECTIONS
4.8. ELECTRICAL CONNECTION
5. INFORMATION ON ADJUSTMENTS
5.1. RECOMMENDATIONS FOR ADJUSTMENTS
5.2. CONVEYOR BELT ADJUSTMENT
5.3. ADJUST THE TRANSPORT UNIT DRIVING CHAIN
5.4. ADJUSTMENT FLAP CLOSER DEVICE
English
To Next Page
Loading...