Robopac ROBOTAPE 50 CFA - 7 Maintenance Information; Maintenance Instructions; Maintenance Period Table

ROBOTAPE 50 CFA
7. MAINTENANCE INFORMATION
7.1. MAINTENANCE INSTRUCTIONS
‒ A good maintenance will allow for a longer working life and constant compliance with the safety
re
q
uirements.
‒ Before performing any operation, the authorised operator must make sure that he/she understood the
"Instructions for use".
‒ Pay attention to the SAFETY WARNINGS, do not use the machine for UNSPECIFIED PURPOSES and assess
the
p
ossible RESIDUAL RISKS.
‒ Carr
y
out the interventions with all the safet
y
devices enabled and wear the DPI
p
rovided.
‒ Mark the intervention area and prevent access to the devices that, if activated, may cause unexpected
hazards and
j
eo
p
ardize the safet
y
level.
‒ DO NOT carry out any intervention that is not described in the manual but contact an Assistance Service
authorised b
y
the manufacturer.
‒ DO NOT damp in the environment materials, pollutant liquids and the residues created during the
interventions but dis
p
ose them accordin
g
to the standards in force.
‒ Before
p
erformin
g
an
y
maintenance o
p
eration, disconnect the
p
ower su
pp
l
y
.
7.2. MAINTENANCE PERIOD TABLE
|
Important
Keep the machinery in maximum efficiency condition and perform all the scheduled maintenance operations
provided for by the manufacturer.
Proper maintenance will provide the best performance, a longer life span and constant compliance with safety
re
q
uirements.
Routine maintenance o
p
eration table
Frequency Component Type of
intervention
Procedure Reference
Every 40
hours
Machine. Cleaning. Clean with a
cloth of air jet.
-
Every 200
hours
Conveyor belts. General
inspection.
Check tension and
adjust, if
necessary,
adjust.
See “conveyor
belt adjustment”.
Every 200
hours
Cutting blade. General
inspection.
Clean with
solvent and a jet
of air.
i
Danger -
Warning
The blade is very
sharp.
Every 200
hours
T
ransport uni
t
driving chain.
General
inspection.
-Wash with
solvent, let it
dry and
lubricate.
-Check tension
and adjust, if
necessary,
adjust.
-See
“Lubrication
point diagram”.
- See “how the
adjust the
driving chain of
the transport
unit”.
English
47/75