Robopac ROBOTAPE 50 CFA - Safety Warnings for Use and Operation; Appropriate Use of the Machine; Security Warning for Reasonably Foreseeable Improper Use

ROBOTAPE 50 CFA
― The electrical connections must be carried out EXCLUSIVELY by operators with particular expertise in
the field of intervention.
― The operator must test the machine and check, through a general test, that the machine can be
commissioned without an
y
risk for the o
p
erator.
― Dismantle all the packaging components in compliance with the standards in force in the country of
installation.
2.3. SAFETY WARNINGS FOR USE AND OPERATION
― The operator must be trained and possess the proper knowledge required to carry out the specific tasks
and must meet the conditions required for the safe use of the machine.
― When using the machine for the first time, the operator must read the manual and identify the controls
and simulate some operations, especially the start-up and shutdown.
― The machine has been designed and built to satisfy all the operating conditions of the Manufacturer,
and those alone.
― Use the machine ONLY with the original safety devices installed by the manufacturer.
― DO NOT tam
p
er with, remove or b
yp
ass the safet
y
devices installed on the machine.
― DO NOT modify the constructive and functional characteristics of the machine.
― ALWAYS wear the individual safety devices indicated in the "Instructions for use" and provided by the
standards in force regarding the safety at workplace.
― ALWAYS keep the surrounding areas in suitable conditions and free of obstacles in order to minimise the
risks, especially near the control station.
― The machine must be used by one operator ONLY, that must be assigned and authorised by the
employer.
― The involvement of one or more assistants when performing some operations or maintenance
interventions may present unpredictable risks.
― In order to minimise the risks related to assistants' involvement, you must inform them priorily on the
t
yp
e of work and the behaviour to be used.
― Make sure that no foreign persons are present within the machine operating area during its production
activity and maintenance.
― Do not use the machine if the scheduled maintenance work has not been regularly carried out.
― DO NOT continue to use the machine if malfunctions have been detected.
― Stop the machine immediately and restart it only after the normal conditions of use have been restored.
― DO NOT carry out interventions different from those indicated in the user manual without the written
consent of the manufacturer.
― Do not carry out interventions with the machine on, but only carry them out after having stopped the
machine and put it in safety conditions.
― DO NOT clean or wash the machine with aggressive products to avoid damaging the components.
― Replace the components ONLY with ORIGINAL PARE PARTS or with SIMILAR design and functional
features.
― Do not abandon the work post or leave the machine unguarded at the end of the work activity without
havin
g
first sto
pp
ed it and
p
ut it in safet
y
conditions.
2.4. APPROPRIATE USE OF THE MACHINE
The machine should be used only for sealing with adhesive tape products packed in cardboard
boxes of various sizes.
2.5. SECURITY WARNING FOR REASONABLY FORESEEABLE IMPROPER
USE
― The predictable incorrect use consists of: “the use of the machine different from the indications given in
the manual, that ma
y
stem from the easil
y
p
redictable human behaviour”.
―
T
he machine must be used ONLY for the uses intended b
y
the manufacturer.
― DO NOT allow the machine to be used by operators that are not properly trained, informed and
unauthorised.
― Packa
g
es that contain li
q
uid or inconsistent
p
roducts must ensure that the
y
do not leak.
English
8/75