Robopac ROBOTAPE 50 CFA - Safety Warnings on Residual Risks

ROBOTAPE 50 CFA
― Do not tape loose, irregularly shaped and not properly collected products, so as to avoid inadequate
p
acka
g
in
g
.
― Do not use the machine to wra
p
and stabilise livin
g
bein
g
s (animals and humans).
― Do not use the machine with adhesive ta
p
e different from that
p
rovided b
y
the Manufacturer.
― Do not use the machine as a workbench.
― DO NOT use or let the machine be used for
p
ur
p
oses or in wa
y
s not
p
rovided b
y
the manufacturer.
― DO NOT use or make use of machines with defective, deactivated and/or not perfectly installed safety
devices.
― DO NOT continue to use the machine if malfunctions have been detected.
Sto
p
the machine immediatel
y
and restart it onl
y
after the normal conditions of use have been restored.
― NEVER carry out an intervention with the machine enabled but ONLY after having stopped it properly,
under safet
y
conditions.
― NEVER use the machine without wearing the Personal Protective Devices indicated by the manufacturer
and re
q
uired b
y
current work
p
lace laws.
― NEVER use the machine if the scheduled maintenance interventions have not been carried out
accordin
g
l
y
.
― DO NOT clean or wash the machine with a
gg
ressive
p
roducts to avoid dama
g
in
g
the com
p
onents.
― DO NOT replace the components with non-original spare parts or with different design and constructive
features.
― DO NOT leave the machine unattended at the end of the work without shutting it down first in safety
conditions.
2.6. SAFETY WARNINGS ON RESIDUAL RISKS
‒ The purpose of this information is to make the user aware to pay special attention in order to foresee
an
y
risk.
‒ When designing and building the machine, the manufacturer has paid particular attention to the
RESIDUAL RISKS that ma
y
affect the safet
y
and health of the o
p
erators.
‒ The residual risks are: “all the risks that persists although all safety solutions have been applied and
inte
g
rated durin
g
machine desi
g
n”.
‒ The manufacturer has complied with the specific standards in force and applied all the "good
manufacturing regulations".
The list specifies the residual risks specific for this type of machine.
‒ Danger of arms cutting: do not put your
hands inside the ta
p
in
g
unit.
English
9/75