Robopac ROBOTAPE 50 CFA - How to Replace the Transport Unit Driving Chain

ROBOTAPE 50 CFA
i Caution - Warning
Before re-startin
g
the machine, check that no tools or other e
q
ui
p
ment has been left near the movin
g
p
arts.
9.3. HOW TO REPLACE THE TRANSPORT UNIT DRIVING CHAIN
Proceed as indicated.
1. Deactivate the main electrical knife to
stop the machine under safe conditions.
2. Unscrew the nuts (Q) to loosen chains
(R) completely.
3. Remove the chain links (T) and remove
chains (R).
4. Install the new chains and lock them with
the chain links.
5. Adjust chain tension.
(See “how the adjust the driving chain of
the transport unit”).
6. Carry out the operation on both driving
units.
|
Important
Re
p
lace one chain at a time to avoid misali
g
nment of conve
y
or belts in relation to ta
p
in
g
head.
7. Restart the machine and check that it functions correctl
y
.
i
Caution - Warning
Before re-startin
g
the machine, check that no tools or other e
q
ui
p
ment has been left near the movin
g
p
arts.
English
55/75