Robopac ROBOTAPE 50 CFA - Manufacturer and Machine Identification; Terms and Definitions

ROBOTAPE 50 CFA
1.2. MANUFACTURER AND
MACHINE IDENTIFICATION
The illustrated identification plate is applied
directly on the machine. It contains references
and indispensable operating safety indications.
A) Machine model.
B) Machine’s serial number.
C) Year of manufacture.
D) Power supply voltage.
E) Power supply frequency.
F) Power supply phases.
G) Electrical power consumption.
H) Total installed power.
L) Air consumption.
M) Max. air supply pressure.
N) Machine weight.
P) Manufacturer’s name.
1.3. TERMS AND DEFINITIONS
Some recurring terms found within the manual are described in order to provide a more complete image of
their meanings.
‒ Routine maintenance
Group of functions necessary to maintain suitable machine operations and efficiency. Normally the
manufacturer, who defines the necessar
y
skills and intervention
p
rocedures,
p
lans these o
p
erations.
‒ Non-routine maintenance
The whole of the operations necessary to keep the operating and efficiency capacity of the machinery.
These operations are not scheduled by the manufacturer and must be carried out by the maintenance
technician.
‒ Qualified technician
a person authorised and chosen from those who have the requirements, skills and information
necessar
y
for installation, use and extraordinar
y
maintenance of the machine.
‒Operator
A person authorised and chosen from those who have the requirements, skills and information
necessar
y
for installation, use and ordinar
y
maintenance of the machine.
‒ Maintenance technician
A person authorised and chosen among those who have the requirements, skills and information
necessary to perform ordinary and extraordinary machine maintenance. He is expected, therefore, to
p
ossess
p
recise information and skills with
p
articular ex
p
ertise in the field of intervention.
‒Format Change
series of operations to carry out on the machine before starting to work with the machine with different
characteristics res
p
ect to the
p
revious ones.
‒ Training
training process aimed to transfer to the operator the knowledge, skills and behaviour required to
o
p
erate the machine autonomousl
y
,
p
ro
p
erl
y
and safel
y
.
‒ Installer
technician chosen, among those that meet the requisites, and authorised by the manufacturer or by its
re
p
resentative, to install and test the machine or the s
y
stem in
q
uestion.
‒ Assistant
em
p
lo
y
ee assi
g
ned to assist the
p
roduction
p
rocesses of the machine or s
y
stem in
q
uestion.
English
5/75