Robopac ROBOTAPE 50 CFA - Adjustment Flap Closer Device

ROBOTAPE 50 CFA
Proceed as indicated.
1. Deactivate the main electric switch to
put the machine in safety conditions.
2. Loosen the screw (E).
3. Operate the chain tensioner roller (F) to
set the tension of the chain.
4. tighten screw (E).
|
Important
To check chain tension, use the method
indicated in the illustration. The resulting
shift (R) should be 5÷10mm.
i Caution - Warning
Before re-starting the machine, check that no tools or other equipment has been left near the moving parts.
5.4. ADJUSTMENT FLAP CLOSER DEVICE
Proceed as indicated.
1. Deactivate the main electric switch to
put the machine in safety conditions.
2. Loosen the screws (G).
3. Adjust the height and the width of the
"flap closing" device and tighten the
screws (G).
i
Caution - Warning
Before re-startin
g
the machine, check that no tools or other e
q
ui
p
ment has been left near the movin
g
p
arts.
| Important
T
his device is ad
j
usted b
y
the manufacturer and does not need ad
j
ustment exce
p
t in
p
articular cases.
English
39/75