Robopac ROBOTAPE 50 CFA - Adjustment of Transport Roller Movement Belt

ROBOTAPE 50 CFA
5.5. ADJUSTMENT OF TRANSPORT ROLLER MOVEMENT BELT
Proceed as indicated.
1. Deactivate the main electric switch to
p
ut the machine in safet
y
conditions.
2. Remove transmission cover (A).
3. Loosen the nuts (B).
4. Move the motor unit to adjust the roller
chain tension (C).
5.
T
i
g
hten the nut
s
(B).
i
Caution - Warning
Before re-startin
g
the machine, check that no tools or other e
q
ui
p
ment has been left near the movin
g
p
arts.
English
40/75