ROBOTAPE 50 CFA
4.8. ELECTRICAL CONNECTION
Proceed as follows for electrical
connections.
1. Check that the mains voltage (V) and
frequency (hz) correspond to those of
the machine (see identification plate and
wiring diagram).
2. Turn main switch (P) to pos. O.
3. Connect the power cord to the outlet (A),
as illustrated, according to the network
mains.
4. The earth wire (yellow and green) must
be connected to its earth terminal PE.
5. Turn main switch (P) to pos. 1.
6. Start the electric motor and check that
rotation direction is that indicated on the
late.
|
Important
If the direction is wron
, deactivate the main electrical knife and invert the
hase cables.
English
To Next Page
Loading...