ROBOTAPE 50 CFA
4. INFORMATION ON HANDLING AND INSTALLATION
OPERATIONS
4.1. RECOMMENDATIONS FOR HANDLING AND LOADING
|
Important
Accomplish handling and loading according to the instructions supplied by the manufacturer to be found on
the machine and in the operating instructions. The person authorized to accomplish these operations must, if
necessar
, or
anise a "safet
lan" to
uarantee safet
to the
ersons directl
involved.
Use normal lifting equipment and means of transport, in accordance with the instructions to be found on the
acka
in
itself.
Those persons responsible for lifting and transportation operations must decide which are the most suitable
means accordin
to the machine’s destination.
Carefully read the "Instructions for use" specified in the manual and those applied directly to the machine
and/or the
acka
e.
Provide suitable safety conditions in compliance with the regulations on workplace safety to prevent and
minimise the risks.
Pay attention to the SAFETY WARNINGS, do not use the machine for UNSPECIFIED PURPOSES and assess the
ossible RESIDUAL RISKS.
4.2. PACKAGING AND UNPACKING
‒ The packing is realised, keeping the overall dimensions low, also in consideration of the transport
chosen.
‒ To facilitate transport, shipping can be performed with some components disassembled and
a
ro
riatel
rotected and
acka
ed.
‒ Some
arts, es
eciall
electric e
ui
ment, are
rotected with anti-moisture n
lon covers.
‒
he cases are marked with all necessar
information for loadin
and unloadin
.
‒ Durin
un
ackin
, check the inte
rit
and exact
uantit
of com
onents.
‒ Packa
in
material should be a
ro
riatel
dis
osed accordin
to the laws in force.
‒ The figure shows the type of package used.
Cardboard box packaging
(Onl
CFA)
Packaging on pallet with protective nylon
(Onl
carriers)
English
To Next Page
Loading...