AX10 Palletizing Solution
Hearing protection is recommended but not mandatory.
Make sure that all local safety measures and regulations are met.
Noise levels should be measured regularly under normal operating conditions.
2.2.4. Cyber Risk
l
The customer must provide a safe firewall connection to avoid unauthorized remote control of the robot.
l
The customer must set a password to avoid unauthorized access to the robot safety configurations.
2.2.5. Residual Risk
For the intended use of the robot system, measures have been taken to prevent personal injury and property damage.
Nevertheless, residual risk remains in certain situations.
Misinstallation
WARNING
Tip Over Hazard
Failure to anchor the Solution according to the guidelines found in the Anchoring the Solution
section may result in material damage, bodily injury or death.
Improper Moving of the Solution
WARNING
Tip Over Hazard
Failure to follow the guidelines found in the Installation section and the Operation section
Maintenance and Repair
WARNING
During maintenance and repair work, make sure that the Palletizing Solution is turned off, de-
energized and cannot be accidentally turned on again.
l
Maintenance and repair work should only be carried by qualified and authorized service personnel.
l
After maintenance and repair work, make sure to remove all tools and equipment to prevent ejected or falling parts, material
damage or bodily injury.
l
All pneumatic tools and devices must be emptied of compressed air before maintenance and repair work.
l
All electric tools and devices must be safely isolated before maintenance and repair work.
l
Always inform the operator before performing maintenance or repair work. Notify a supervisor and lock out/tag out the machine
to prevent users from turning on and using the system. Enforce local safety regulations.
15
To Next Page
Loading...
