Robustel R5020 - Page 107

Robustel R5020 User Guide
RT_UG_R5020_v.1.0.2 Mar. 17, 2023 107/167
General Settings @ OpenVPN
Item
Description
Default
Enable DNS overrid
Click the toggle button to enable/disable this option. When enabled, the
DNS pushed by the server will be received as the local DNS server.
OFF
Enable Default
Gateway
Click the toggle button to enable/disable this option. When enabled, the
gateway pushed by the server will be received as the local gateway.
ON
Enable Client Status
Click the toggle button to enable/disable this option. Used to display
information about the status of connected clients when the server is
enabled.
OFF
Enable NAT
Click the toggle button to enable/disable the NAT option. When
enabled, the source IP address of host behind router will be disguised
before accessing the remote OpenVPN client.
OFF
Verbose Level
Select the level of the output log and values from 0 to 11.
 0: No output except fatal errors
 1~4: Normal usage range
 5: Output R and W characters to the console for each packet read
and write
 6~11: Debug info range
0
Advanced Settings @ OpenVPN
Item
Description
Default
Enable HMAC Firewall
Click the toggle button to enable/disable this option. Add an additional
layer of HMAC authentication on top of the TLS control channel to protect
against DoS attacks.
OFF
Enable PKCS#12
Click the toggle button to enable/disable the PKCS#12 certificate. It is an
exchange of digital certificate encryption standard, used to describe
personal identity information.
OFF
Enable nsCertType
Click the toggle button to enable/disable nsCertType. Require that peer
certificate was signed with an explicit nsCertType designation of "server".
OFF
Expert Options
Enter some other options of OpenVPN in this field. Each expression can be
separated by a ‘;’.
Null
Click Password Manage to add user names and passwords, up to 20. The following is displayed.