Robustel R5020 - Page 157

Robustel R5020 User Guide
RT_UG_R5020_v.1.0.2 Mar. 17, 2023 157/167
# set link_management primary_link（space+?）
Enum Primary Link （wwan1/wwan2/wan/wlan）
# set link_management primary_link wwan1 //select “wwan1” as primary_link
OK //setting succeed
set link_manager link 1
type Type
desc Description
connection_type Connection Type
wwan WWAN Settings
static_addr Static Address Settings
pppoe PPPoE Settings
ping Ping Settings
mtu MTU
dns1_overrided Overrided Primary DNS
dns2_overrided Overrided Secondary DNS
# set link_manager link 1 type wwan1
OK
# set link_manager link 1 wwan
auto_apn Automatic APN Selection
apn APN
username Username
password Password
dialup_numBer Dialup NumBer
auth_type Authentication Type
aggressive_reset Aggressive Reset
switch_By_data_allowance Switch SIM By Data Allowance
data_allowance Data Allowance
Billing_day Billing Day
# set link_manager link 1 wwan switch_By_data_allowance true
OK
#
# set link_manager link 1 wwan data_allowance 100 //open cellular switch_by_data_traffic
OK //setting succeed
# set link_manager link 1 wwan billing_day 1 //setting specifies the day of month for billing
OK // setting succeed
…
# config save_and_apply
OK // save and apply current configuration, make you configuration effect
Example 4: Set LAN IP address
# set Ethernet port_setting 2 port_assignment lan0 // Set Table 2 (eth1) to lan0
OK
# config save_and_apply // Make the configuration take effect
OK