Robustel R5020 - Page 158

Robustel R5020 User Guide
RT_UG_R5020_v.1.0.2 Mar. 17, 2023 158/167
Example 5: Set LAN IP address
# show lan all
network {
id = 1
interface = lan0
ip = 192.168.0.1
netmask = 255.255.255.0
mtu = 1500
dhcp {
umber = true
mode = server
relay_server = “”
pool_start = 192.168.0.2
pool_end = 192.168.0.100
netmask = 255.255.255.0
gateway = “”
primary_dns = “”
secondary_dns = “”
wins_server = “”
lease_time = 120
expert_options = “”
umbe_enaBle = false
}
vlan_id = 0
}
multi_ip {
id = 1
interface = lan0
ip = 172.16.24.24
netmask = 255.255.0.0
}
#
# set lan
network Network Settings
multi_ip Multiple IP Address Settings
vlan VLAN
# set lan network 1(space+?)
interface Interface
ip IP Address
netmask Netmask
mtu MTU
dhcp DHCP Settings
# set lan network 1 interface lan0
OK