Initial Startup • 9
111
This display is visible when no communication is taking
place.
This display is visible when software updates are being
transferred to the meter.
■ If the meter transfers data wirelessly immediately
after a test, this communication is not visible on
the display. The display remains unchanged (usually
in the Main Menu view after a test).
■ If a meter is in standby (but not docked) and commu-
nicating wirelessly, this communication is not
visible on the display. The display remains blank.
Docked
Idle
12:48 pm
09/18/13
Docked
Updating Software...
12:48 pm
09/18/13
To Next Page
Loading...
