Meter Setup
23
Meter Setup
Note: If you switch on the meter for the first time, or the meter has been without power for
more than 10 minutes, you must set the date and time. In this case the meter takes you
directly to the Setup mode, where you set date and time.
See “Setting the Date” on page 33 and “Setting the Time” on page 35.
Once you finished these settings, the meter automatically displays the Main Menu. Here you
can continue with the meter setup or start a test.
Names of screen objects you can actively use (buttons) are written in bold.
Names of inactive screen objects (e.g. screen titles) are written in italics.
You can call up any displayed function by
touching (or tapping) the button for it with
your finger. “Tap” means: Touch the button,
then remove your finger from the touch-
screen. The next screen appears once you
remove your finger.
1 Touch Setup to call up the Setup menu.
2 Select the group of settings of choice
(see the summary starting on page 24).
For a description of the buttons and icons
used on screen see page 15.
09:15 am
Data Handling
ID Setup
Lockout
Basics
Optional Screens
Setup
Main Menu
11/24/2009
09:15 am
QC Test
Memory
Setup
Patient TestQC!
To Next Page
Loading...
Need help?
General
