Memory
115
Memory
The meter has a 500-value memory for saving results (patient tests and quality control tests sep-
arately) together with the time, date and if applicable, comments. In addition, the memory can
store up to 200 code chip records (100 test strip lots and 100 control material lots).
Viewing Test Results
1 Turn the meter on by pressing the On/Off
button for longer than 5 seconds.
Note: You can also turn on the meter directly
by connecting the handheld power supply.
2 To turn the meter off after use, press the
button for longer than 2 seconds.
Note: Depending on the system settings the
operator my have to log in and/or enter a
password. Follow the procedures as
described on page 90.
3 Wait until the main menu is displayed.
Main Menu
11/24/2009
09:15 am
QC Test
Memory
Setup
Patient Test
To Next Page
Loading...
