Meter Setup
70
Quality Control (QC) Settings
QC Settings define that operator-independent quality control tests must be run on a regular
basis. Lockouts may be triggerd by selectable time periods, and lockouts may be triggered by
certain events. The QC Settings menu contains the following options:
■ New Lot Lockout (applies every time a new test strip lot is used)
■ QC Lockout (time-based)
■ IQC Lockout (time-based)
■ QC Result Format (select the format for QC result displays)
■ Reset Test Param. (reset all test parameters, including code chip data and QC lockouts)
To Next Page
Loading...
