Performing a Test
101
Displaying, Confirming or Adding Comments to Results
As described in the chapter “Optional Screens Setup” starting on page 80, there are many
options for displaying results that can be activated:
If the new Operator Login is required to display
the result:
1 Touch the button for operator login.
2 Log in as described on page 90.
The result is now displayed.
Pat. Test - Op. Login
09:15 am
Measurement
Complete
proBNP PB1234
SCHULZ, MANFRED
JONES, TOM
Par:
Op:
Code:
PID111SCHULZM457Pat:
To Next Page
Loading...
